Designer Stone
18 shadesEighteen marbles, granites and onyxes across four surface textures
Collection · 3 shades
Rockface Stone flexible clay cladding
Raw split rock, three tones
Rockface Stone has no coursing, no grid and no repeat you can point to — just a continuously broken rock face, as though the wall had been split rather than built. It is the most aggressive texture in the range and the one that most needs a large, uninterrupted plane to work.
RS-1 is a bright quartz white and is what most people picture: a wall that appears to be hewn from a single block. RS-2 is a warm cream limestone. RS-3 is a rust-red that reads as weathered sandstone.
Two practical notes. The relief depth means the sheet needs a well-prepared, level substrate — undulation in the base wall shows up in the shadow pattern. And the same RS- prefix is used by Ripple Stone, so quote the collection name when ordering.
- Shades
- 3
- Patterns
- Regular · Random
- Sheet sizes
- 595×1195 · 595×2395
1195×2395 mm - Thickness
- 2.5–3.5 mm
- Weight
- ~4.5 kg/m²
- Fire rating
- Level A1
- Min. bend dia.
- 381 mm (15 in)
Available shades
Rockface Stone shade range
3 shades, each available in Regular and Random pattern.
RS-1
RS-2
RS-3
Photos and images are for reference only. There may be a difference between the image and actual material.
Suited to
Where Rockface Stone works best
Exterior façade
Full elevations, parapets and boundary walls, without adding dead load to the structure.
Interior feature wall
Full-height walls behind reception desks, beds and bars, in textures that would be impractical in stone.
Hospitality
Hotels, restaurants and spas, where the finish has to be tactile at arm's length and survive a wet room.
Get a quote
Priced for Rockface Stone.
Indicative supply rate: ₹350–₹450 per sq ft, supply only, ex-Bengaluru. Adhesive, applicator and site conditions are quoted per project.
Send us the area and the shade code and we will come back with a written price, a lead time and physical samples.
Request a quote
Send us the area, the substrate and the finish you have in mind. We reply with shade options, a written price and a lead time — usually the same working day.
The enquiry form loads in a moment. If it does not, email us at enquiry@curvato.in and we will pick it up from there.
Also consider
Related collections
Get a quote
Send us the wall. We'll send back a quote.
Tell us the area, the substrate and the finish you have in mind. We reply with shade options, a written price and a lead time — usually the same working day.
- Thickness
- 2.5–3.5 mm
- Weight
- ~4.5 kg/m²
- Fire rating
- Level A1
- Min. bend dia.
- 381 mm (15 in)